Listening Through A Receiver (Home Theater) - Samsung 5 Serie Guide De L'utilisateur

The Anynet+ function only works when the active source on the TV remote control is set to TV.
N
The button works only while in the recordable state.
N
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The Anynet+ functions do not operate with other manufacturers' products.
N
The , operations may differ depending on the device.
Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Recording
Menu
INFO
Timer Recording
Stop Recording
Receiver
Setup
Recording
❑
You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button.
. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
When the recording device is not displayed
Select Device List and press the red button to search devices
. Press the EXIT button to exit.
Pressing the button will record whatever you are currently watching. If you are watching video from another device, the video
N
from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna
N
to a recording device, refer to the recording device's users manual.

Listening through a Receiver (Home theater)

❑
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ▲ or ▼ button to select Receiver.
. Press the ◄ or ► button to select to On.
Now you can listen to sound through the receiver.
. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV.
N
When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is
N
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater
receiver.
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure),
N
the Speaker Select may be set to External Speaker when you turn the TV on again.
Switches from Anynet+ to TV broadcast mode.
Displays the Anynet+ device list.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.
Allows reserving a recording. (This menu works only for a device supporting recording reservations.)
Stops recording.
Sound is output through the receiver (home theater).
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using Anynet+.
English - 
Description
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
: DVDR
: On
Move Enter Return