Anynet; Connecting Anynet + Devices - Samsung 6 Serie Mode D'emploi

Anynet+

Connecting Anynet + Devices

The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device
has this feature, check if there is an Anynet+ logo on it. Connect the LAN port on the rear panel of the TV and the external
modem with a LAN Cable.
To connect to a TV
❑
1. Connect the HDMI IN (1, 2(DVI), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
To connect to a Home Theater
❑
1. Connect the HDMI IN (1, 2(DVI), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
TV
Connect an Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the
N
Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home
N
Theater's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO
OUT (OPTICAL) jack on the DVD / Blu-ray Player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theater, not the TV.
Connect only one Home Theater.
N
Some HDMI cables may not support Anynet+ functions.
N
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
N
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
N
TV
HDMI 1. Cable
HDMI 1. Cable
Anynet+ Device 1 Anynet+ Device 
HDMI 1. Cable
HDMI 1. Cable
Home Theatre
Optical Cable
HDMI 1. Cable
Anynet+ Device  Anynet+ Device 
HDMI 1. Cable
English - 5
Anynet+ Device  Anynet+ Device 4
HDMI 1. Cable
Anynet+ Device 1
HDMI 1. Cable
Anynet+ Device 4
HDMI 1. Cable
Continued...