16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
16.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the
device:
►
Unplug the plug from the wall power outlet prior cleaning of the device.
► Clean the device directly after use. Extended waiting unnecessarily complicates
cleaning and can make it impossible in extreme cases. Excessive accumulations of
dirt can even damage the device under certain circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Never immerse the device, cord or plug in water or other liquids and do not place in
the dishwasher.
► The blades can be sharp, do not touch them.
► For safety reason, the blades are not suited for removing them.
16.2 Cleaning
Base and grinding container
Clean the base and exterior of the grinding container with a damp cloth.
Detach the grinding container by turning counterclockwise and clean the interior of the
grinding container under running water. Then dry the interior of the grinding container with
a soft cloth.
Attach the grinding container by turning it clockwise until it locks (see "Bowl – LOCK").
Transparent lid
Clean the lid with warm water and a drop of cleaning agent. Then dry it with a soft cloth.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages.
17.1 Safety notices
Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
32