Microsoft Surface Hub Mode D'emploi page 13

B. Slide the mounting bar into Surface Hub's frame.
a. Depress the lever inside the mounting bar.
b. Once it releases, slide the mounting bar into the frame.
Press to
release
c. Close the plastic door cover.
d. Repeat for all extended mounting bars.
Step 6: Adjust and level the assembly
A. Use the leveling screws at the bottom of the upright to level the Surface Hub.
a. Adjust the base of the upright to be flat on the floor.
b. With the base flat on both edges, adjust the leveling screws until the floor support mount and Surface Hub are level.
Note: When you are done, all edges of the upright should be flush against the floor.
Close
door
K
Leveling Screws
11