Speedlink POWERSTIXX ULTRA 2.1 Mode D'emploi page 10

4. Fit the battery compartment into the remote control. Make sure
D
the + and - markings and the function buttons of the remote control
GB
all point upwards (see right-hand diagrams)!
5. Replace the screw and fasten the battery compartment.
F
Notes about batteries:
E
• Keep batteries out of reach of children.
• Do not mix old and new batteries, or batteries of different types.
I
Follow manufacturer's instructions on battery use.
• Remove old, weak or worn-out batteries promptly.
• Always recycle or dispose of used batteries in accordance with local
regulations.
3. Functions of the remote control
Button
On/Standby
Master (-/+)
Sub
Treble
3d
4. Troubleshooting
The system is correctly connected but the LED on the front of the
subwoofer does not light when switching on.
Check that you have moved the switch at the bottom of the subwoofer to
the "on" position.
No sound
Make sure you have correctly connected the system to your sound
source.
Function
puts the system in standby mode
adjusts the overall volume of the
system
adjusts the bass sound of the
subwoofer
adjusts the sound of the system
generates virtual 3d sound
10