Speedlink FULL METALL 5.1 SYSTEM Mode D'emploi page 12

1. Use the supplied cable
satellites (Front Left/Front Right/Centre). Connect the cables according to
the colour markings with correct polarity to the inputs "Front Left/Centre/
Front Right" on the back of the subwoofer.
2. Connect the cables for the rear speakers
according to polarity, to the "Rear R"/"Rear L" inputs on the back of the
subwoofer.
3. Connect the supplied cable
"IR Sensor" input on the back of the subwoofer and the other end to the
corresponding socket on the back of the centre speaker.
4. Use the supplied mains adapter for connection to the power supply. Connect
the mains adapter to the "AC Input" socket on the back of the subwoofer and
the other end to the wall socket.
13,5V
5A Adapter
(s. „Supplied with product) for connecting the front
, (s. „Supplied with product)
(s. „Supplied with product) with jack plug to the
13
GB