Content
Overview ...........................................12
Operation .............................................14
Restrictor ...........................................15
work...................................................16
Storage..............................................16
protection ............................................16
Guarantee ............................................17
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a final inspection. The
functionality of your equipment is therefore
guaranteed. It cannot be ruled out that
residual quantities of lubricants will remain
on or in the equipment/hose lines in isolat-
ed cases. This is not a fault or defect and
it represents no cause for concern.
The operating instructions con-
stitute part of this product. They
contain important information on
safety, use and disposal.
Before using the product, familiar-
ise yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified. Keep
this manual safely and in the event
that the product is passed on, hand
over all documents to the third
party.
Intended Use
The device is suitable for removing coats
of paint, for heating (for example, shrink
tubing), and for plastic deformation and
welding. It can be used to loosen adhe-
sive joints, defrost water pipes and to
ignite charcoal.
This equipment is not suitable for com-
mercial use. Commercial use will invali-
date the guarantee. Any other use that is
not explicitly approved in these instruc-
tions may result in damage to the equip-
ment and represent a serious danger to
the user.
GB
11