Use Of Timer Panel (If Applicable); Use Of Irons; Operation To Be Carried Out At The End Of Your Work; Handling And Transport - Reverberi TARV Livret D'emploi Et D'entretien

Manuale del d'uso ed installazione – TARV
5.2
USE OF THE TIMER PANEL (IF APPLICABLE)
1) Suction time regulator (B). The relative warning light (E) will remain on for as long as the aspirator
operates.
2) Pause time regulator (C). The relative warning light (F) will remain on throughout the pause time.
3) Steaming time regulator (D). The relative warning light (G) will remain on throughout the steaming
time.
4) The red button (A) will start the automatic cycle programmed with the three regulators (B), (C), (D).
5.3
USE OF THE IRON
The TARV series steaming table can be used with an iron. Proceed in the following way:
Connect the steam tube of the iron to the hose nipple of the solenoid valve mounted in the lower right-
hand part of the table and tighten well with the relative clamp.
Insert the plug of the iron into the socket on the right-hand side of the main switch (QS) and lower the
clip. Operate the lighted switch (4) in order to power the iron.
Press the button on the handle of the iron in order to obtain steam.
5.4
WHAT TO DO AT THE END OF WORK
Turn off the boiler, aspirator and iron switches (2), (3) and (4).
Turn off the main switch (QS) by turning it to position "0".
To avoid burns when you carry out the water exhaust operation, you have to pay
special attention not to touch the metal parts of the exhaust system itself.

5.5 HANDLING AND TRANSPORT

To trasport the machine, you need to:
Extract the end socket of the cable from the tap set for the purpose and position it so as it may not cause
hindrance or be damaged during trasport.
Disassemble the accessories and the components which are not rigidly fixed to the machine.
The boiler is provided with wheels that allows it to be simply handled for short stretches.
del 15-10-2001 - C:\SETTORE STIRO\M860-1-M870-1-M880-1-M890-1\MANUALE ISTRUZIONI\TARV.doc Pag. 29 di 55