Cleaning And Maintenance - EuroSteam Duet 6246 Manuel D'instructions

*Cleaning the tank is important to the performance of the iron*

CLEANING AND MAINTENANCE

Warning. Risk of burns.
power
Caution. Risk of material damage
Cleaning the appliance
abrasive products to clean the device.
Descaling cleaning
To prolong the life of your iron, we recommend that this procedure be carried out at regular
intervals (once or twice a month). This is an activity that allows you to remove the limescale
deposits and the impurities from inside the soleplate thanks to the steam and hot water, we
suggest you to carry out this operation over a basin.
- Carry out the operations described in the paragraph "Filling the tank during use".
- Keep the appliance in horizontal position over a basin. Insert the plug into a power outlet.
holes removing limescale and deposits from within the soleplate.
- Gently move the iron back and forth until the tank is completely emptied.
the operation.
- Make sure that the soleplate is completely dry before storing the iron.
Before using the appliance, clean the soleplate on an old cloth to make sure that the soleplate
and tank are clean and to allow residual test water that has remained inside the pipes to va-
porize.
Tank cleaning
To clean the tank, insert fresh water, rinse and drain.
Caution. Risk of material damage
could affect the warranty.
The warranty does not cover damage caused by clogging due to lime.
Cleaning the soleplate and shell
Any deposits and other residue on the soleplate can be removed using a cloth soaked in a
water and vinegar solution.
Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth.
the appliance cool down for a few minutes.
Doing so
15