1.B. Safety instructions
• risk of suction entrapment hazard, which,
if not avoidedcan result in serious injury
or death. Do not block pump suction at
the pump or in the pool as this can cause
severe injury or death
• Electrical wiring MUST be installed by a
trained professional and adhere to local
code and regulations.
• Avoid electric shock. DO NOT USE
power extension cords.
• Never submerge the filter and/or pump in
water.
• Never place the pump or filter in your pool.
• Trapped air in the pump-filter system may
cause the TANK COVER to be blown off
which can result in death, serious injury, or
damage to the pumpfilter system. Ensure
all air is out of system before operating.
• NEVER change the 7 Position Multi-Port
valve while the system is operating.
• ALWAYS unplug the system before
changing the control valve.
• Instal this product with a sufficient safety
margin from the pool to prevent children
from using the system to access the pool.
• Never PLUG or UNPLUG this unit from
an electrical source while standing in water.
• NEVER service this unit with the electrical
power cord connected.
• Do NOT operate the system while the
pool is being used.
• KEEP CHILDREN AWAY from all electrical
equipment.
• NEVER ALLOW CHILDREN TO
OPERATE THIS EQUIPMENT
• The Pool Owner should always exercise
The Pool Owner should always exercise
We cannot be responsible for damages
to the product if the product is not used in
accordance with the instructions provided.
2. INSIDE THE BOX
The pump included with the filtration
system is a horizontal, selfpriming
centrifuge pump. For the pump
to
function
correctly,
temperature must not exceed 35°C
/95° F. The materials used in the pump
have undergone stringent hydraulic
testing and electrical inspections. The
filter included in the filtration system
consists of high-grade polypropylene
(PP). It is seamless and manufactured
as a single unit (absolutely corrosion
resistant and resistant to commercially
available swimming pool chemicals).
(Prerequisite: Compliance with the
standard recommended specifications
for the pH- and chlorinevalue). It is
equipped with a container drainage
system,
pressure
container components, e.g. bottom
strainer for even water distribution and
a stable PE separation wall between
the filter and the fresh water chamber.
Read this manual carefully before
installation. The filtration system and
pump must be installed in accordance
with the standards in effect.
Damage during delivery
Your filter system has been carefully
and professionally packed for delivery.
Please check to ensure that the package
is undamaged and that ailparts are in
EN
the
water
gauge,
built-in