Key B Organ Viscount Legend Solo Mode D'emploi page 35

26. [PEDALS TO LOWER] button.
When the led is on, the pedalboard drawbars can be played through the first 25 keys of the
Single
keyboard (in
Double
mode).
In default conditions, both the Pedals drawbars and the manual drawbars are played simultaneously within
this keyboard zone. By holding down [TRANSPOSE SELECT] and pressing the F3 key, only the pedals
drawbars are active in this area of the keyboard, while the manual drawbars sound starting from the third
C#. To restore the default operation, press the F#3 key while holding down [TRANSPOSE SELECT].
27. [TRANSPOSE SELECT] button.
Adjust the keyboard transposition and set up the instrument functions.
28. [TUNING] trimmer.
Adjust the instrument's fine tuning. When the trimmer is to the far left, the tuning is 1/2 semitone lower; at
the far right, the tuning is 1/2 semitone higher.
29. [PERCUSSION ON/OFF] button.
Button to activate the percussion when using the Set B drawbars (in
Split Double
(in or ). The percussion is active when the button's LED is on
30. [PERCUSSION SOFT/NORMAL] button.
Select one of the two percussion levels. In NORMAL mode (led off
with the potentiometer [PERCUSSION VOLUME] (see point 22). In SOFT (led on) the volume is attenuated.
31. [PERCUSSION SLOW/FAST] button.
Switch between two percussion decay durations. In SLOW mode (led off) the decay time is set by the
[PERCUSSION DECAY] potentiometer (see point 21). In FAST mode (led on) the decay time is shorter.
32. [PERCUSSION 2nd/3rd] button.
Select the percussion harmonic. 2nd (led off
(led on) selects the third harmonic (equivalent to a 2 2/3' register).
For further information on the percussion read par. 4.3.
Split
or mode) or the first 24 keys of a keyboard connected to the [MIDI IN] port (in
)
selects the second harmonic (equivalent to a 4 'register), 3rd
EN - 7
Single
mode) or in the Upper section
)
the volume of the percussion is set
User Manual
Legend Solo