Briteq PD-32SH/FR Mode D'emploi page 7

ENGLISH
MAINTENANCE
Switch the unit off and unplug the mains cable BEFORE servicing!
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
 The unit and its installation conditions should be inspected and approved every 3 months by an authorized
expert!
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
Power Input:
Maximum overall power:
Maximum power per phase:
Maximum power per output:
Protection class:
Max. Leakage current:
Automatic fuses / phase:
Diameter Power cord:
Diameter internal wiring:
Size:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
BRITEQ
®
DANGER TO LIFE:
IEC60309-standard, CEE-32A industrial plug
380V–400V / 50Hz, 3phase, 5wire (3P+N+E)
22.080Watt (3x 32A)
7.360Watt (32A)
3.680Watt (16A)
class I (only to be connected to class I outlets)
30mA
2x C16 (I
5x 6mm² (H07RN-F 5G6)
32A-wires: 10AWG (5,2mm²) – 16A-wires: 14AWG (2,1mm²)
see drawings
8.8 kg
Every information is subject to change without prior notice
=16A, instantaneous tripping current = 5x I
n
5/27
USER MANUAL
)
n
PD-32SH