Working In Manual Mode - Milwaukee M12 CLLP Notice Originale

WORKING IN MANUAL MODE

In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can
be set at any slope required.
1
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
2
Turn the rotation dial to:
3
Same as in the self-leveling
mode, the cross laser will
generate 2 laser beams, but the
laser beams are interrupted
every 8 seconds.
8 sec. 8 sec. 8 sec.
ENGLISH
4
Choose the beams that
you want to work with by
pushing the MODE
button.
5
Tilt the laser and adjust to the
desired angle and height.
6
To turn the Manual mode off ,
turn the rotation dial to: .
or
turn the rotation dial to: .
8