Weber Chariot Instructions De Montage Et Consignes De Sécurité page 8

How to use the Weber hitch
Hitch maintenance:
PRESS THE PIN
TWIST OPEN...
PUSH
TOGETHER...
TWIST CLOSED UNTIL
PIN LOCKS IN PLACE
LOCK!
ATTACH
SAFETY STRAP!
The parts are largely maintenance free but should still be regularly cleaned
to remove all dirt, salt and dust.
Never use oil to improve the function; if stiff, only ever apply a little silicon
or Teflon spray.
Attachment:
1. Press the pin on the handle and twist the grip piece
anti-clockwise.
2. Push the grip piece and the hitch together. Ensure that the
smooth surfaces of the hitch and the connection piece are
aligned with one another.
3. Twist the grip piece clockwise until you hear a clear click.
Only then is the hitch securely locked into place.
4. In the case of connection pieces with a lock, lock the hitch
with the key provided.
5. Place the safety strap around the bike's rear chainstay.
Thread the strap through the loop and lock it in place by push-
ing it together. The strap should have enough play to not impair
the trailers ability to change direction.
Removal:
1. Unfasten the safety strap on the bike frame
and unthread it.
2. Press the pin and twist to open.
3. Remove the tow bar from the hitch.
www.weber-products.de
8