Twin-Star International 36II100GRG Mode D'emploi page 15

Operation
Installation - Built In Construction (continued)
1
Removing the Stickers
Remove the black stickers.
3
Steps 3 to 6 describe optional installation for
removing the power cord and changing to hard wired
Remove the pre-attached Screw (DD) holding
the junction box cover.
Loosen the three screws holding the wires and
remove the Negative, Live and Ground wires.
A189
Black stickers
2
Fastening the Hinges
Fasten the mounting hinges (KK) with Screws (DD).
Terminals
Junction Box Cover
15
KK
Terminals
L N G
Loosen the 3 screws
www.tsicustomerservice.com