Description Of Parts - Toastess TSP-10 Mode D'emploi

TSP-10 Booklet 11/12/01 1:36 PM

DESCRIPTION OF PARTS

1. Lid
2. Percolator Body
3. Base
4. Brew Basket Cover
5. Brew Basket
6. Spring
7. Percolator Tube
8. Indicator Light
BEFORE FIRST USE
Before making coffee for the first time, wash the Brew Basket, Brew Basket
Cover, Percolator Tube and Lid in warm soapy water. Rinse and dry.
Rinse the inside of the Percolator Body with clear water. DO NOT IMMERSE
BASE OR PERCOLATOR BODY IN WATER OR ANY OTHER LIQUID.
INSTRUCTIONS FOR USE
1. Remove the Percolator from the Base.
2. Remove the Lid, Brew Basket, Brew Basket Cover and Percolator Tube.
3. Fill the Body with the required amount of fresh cold water. The cup markings
are on the inside of the Body. NOTE: Do not use the Percolator is the liquid
is less than the 4 cup marking or more than the 10 cup marking.
4. Put the required amount of ground coffee (a perk or coarse grind is
recommended) in the Brew Basket. NOTE: Use one level tablespoon per
cup. You may want to experiment to find the quantities necessary to suit
the blend you use and your own taste.
5. Lower the Brew Basket onto the Percolator Tube until the bottom of the
Basket rests on the spring.
6. Hold the Percolator Tube/Brew Basket by the top of the Percolator Tube
and lower the assembly into the Percolator Body so that the Percolator
Tube fits in the element well in the center of the Percolator Body.
Page 9
1
2
8
3
4
5
6
7
3