TSP-10 Booklet
11/12/01 1:36 PM
7. Place the Brew Basket Cover on top of the Brew Basket. Replace the Lid
and push firmly to close. Rotate the Lid if it does not close properly. If still
not closed make sure that the Brew Basket/Percolator Tube assembly is
centered. NEVER OPERATE THE PERCOLATOR WITHOUT THE LID IN THE
PROPER POSITION.
8. Position the Base on a firm, level, heat-resistant surface and plug into the
wall outlet.
9. Position the Percolator on the Base. The red Indicator Light will glow and
the coffee will begin to brew.
10. Once the brewing cycle is complete the Indicator Light will switch to
green and the coffee is ready to serve.
11. Serve and return the Percolator to the Base. The green Indicator Light will
remain on. The coffee will remain hot, as long as the Base is plugged into
the outlet.
CARE AND CLEANING
1. Unplug the Base from the outlet.
2. Pour out any unused coffee and allow the Percolator to cool.
3. Remove the Lid, Brew Basket, Brew Basket Cover and Percolator Tube.
4. Dispose of the used coffee grounds.
5. Wash the Lid, Brew Basket, Brew Basket Cover and Percolator Tube in hot
soapy water, rinse and dry.
6. Rinse the inside of the Percolator with warm water and wipe the outside
with a damp cloth. NOTE: NEVER IMMERSE THE PERCOLATOR BODY
OR BASE IN WATER OR ANY OTHER LIQUID. DO NOT USE ABRASIVE
CLEANSERS OR SOLVENTS.
7. If necessary, once the Base has been unplugged from the outlet, wipe
with a damp cloth.
Page 10
4