HEADRUSH LOOPERBOARD Guide D'utilisation Rapide page 5

14. USB Type-A Ports: Connect USB flash drives to these USB ports for additional storage. You can
save and load loops with the connected USB flash drive, as well as record loops directly to the
USB flash drive. Backing tracks can be played directly from the USB flash drive. Class-compliant
USB devices can be connected to these USB ports for external MIDI control.
15. SD Card Slot: Insert a standard SD/SDHC card into this slot for additional storage. You can save
and load loops with the SD card, as well as record loops directly to the SD card. Backing tracks
can be played directly from the SD card.
Important: To avoid file loss or damage to your media, only disconnect USB and SD storage
devices from HeadRush Looperboard while it is powered off. Alternatively, go to the Storage page
and then tap the storage device's eject icon.
Setup
Items not listed under
Microphone
Drum Machine
Keyboard
Introduction > Box Contents
Guitar
Headphones
are sold separately.
USB
SD
Drive
Card
PA Loudspeakers
or Mixer
Amplifier
Computer
Power Outlet
5