Output Setup - HEADRUSH LOOPERBOARD Guide D'utilisation Rapide

Track Setup
To route an input to a looper track, tap the desired
Input 1–4 button. When Stereo Link is enabled,
Inputs 1+2 and/or Inputs 3+4 will be selected
together.
To select a track output mode, tap the Mono
(monoaural) or Stereo (binaural) buttons.
To route a track to an output, tap the desired
Output 1–4 button. If the output mode is Stereo,
Outputs 1+2 and/or Outputs 3+4 will be selected
together.
To route a track to the phones output, tap the
headphone icon at the bottom of each track. Use the
Phones knob to adjust the output volume level.
To route the click to an output, tap an Output 1–4 button under Click Output on the left side of the
touchscreen. Tap the headphone icon to route the click to the phones output. Use the Main and
Phones knobs to adjust the output volume level of the outputs and phones, respectively.
To select routing for the stereo backing track, tap the 1+2 or 3+4 buttons under Backing Track
Output on the left side of the touchscreen. Tap the headphone icon to route the backing track to the
phones output. Use the Main and Phones knobs to adjust the output volume level of the outputs
and phones, respectively.

Output Setup

To adjust the output level of an individual output,
tap and drag the white line at the top of its meter.
18