Important Safety Information - Power Dynamics B Serie Mode D'emploi

Important Safety Information

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply
cord. If it is damaged or deformed, it may
cause electric shock or malfunction when
used. When removing from wall outlet, be
sure to remove by holding the plug
attachment and not by pulling the cord.
2. In order to prevent electric shock, do not
open the top cover. If a problem occurs,
contact your dealer.
CAUTION: TO REDUCE THE NOTE:
RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK ) . THERE ARE NO
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of un insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
NOTE:
This unit may cause interference to radio and television reception
3. Do not place metal objects or spill liquid
inside the unit. Electric shock or malfunction
may result.
USE OF CONTROLS OR ADJUSTMENTS
OR REFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. THE UNIT SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL DOUBLE INSULATED. WHEN
SERVICING, USE ONLY IDENTICAL
REPLACEMENT PARTS.
3 - 40