Askoll eS1 Mode D'emploi page 289

Place battery and charger on a stable surface.
First, connect the charger cable to the battery
socket under the spring flap. A "click" shows correct
introduction.
Then connect the charger to the mains.
Select desired recharge mode, as shown in "BATTERY
CHARGER".
Once charging has finished, place battery and charger
in their compartment as follows:
First place the charger on the vehicle and connect the
cable with connector to the vehicle socket.
eS_Rev02_EN.indb 49 eS_Rev02_EN.indb 49
BATTERIES AND RECHARGE
EN
EN
EN
EN
EN
49
15/07/2020 11:58:43 15/07/2020 11:58:43