Askoll eS1 Mode D'emploi page 268

USE
Engine enabling
The engine must be enabled to start.
To enable the engine, insert the key into the switch
and turn it to , then press for 3 seconds to enable
the engine, motion warning light will turn on.
To disable the engine, press the engine enabling
button again for 3 seconds and turn the key in the
ignition switch to the left on
The engine will be disabled also by rotating the key
to .
28
eS_Rev02_EN.indb 28 eS_Rev02_EN.indb 28
eS - eS
1
.
- eS EVO eS - eS EVO eS 25Km/h - eS
2 2 3 3 1
25Km/h
2
15/07/2020 11:58:14 15/07/2020 11:58:14