Equalizer (Eq); Charging A Mobile Device; Warranty; Specifications - PERFECTPRO BLUEBULL Mode D'emploi

EQUALIZER (EQ)

The EQUALIZER function enables you to select a setting from 5 presets EQ modes.
Each presets EQ contains a group of parametric controls in the digital audio processor,
which offer you optimum adjustments for various kinds of music and applications for
different environments.
1. Press and hold the POWER button for 2 seconds to switch on the Bluebull
speaker. The default mode is Bluetooth.
2. Press the EQ/MODE button repeatedly to select the desired EQ.
3. Then the EQ. LED will light up, together the current active EQ mode.
NEUTRAL mode EQ LED and NEUTRAL LED
ROCK mode EQ LED and ROCK LED
INDOOR mode EQ LED and INDOOR LED
JAZZ mode EQ LED and JAZZ LED
OUTDOOR mode EQ LED and OUTDOOR LED
4. The LED display will return automatically to Battery Level LED indication after about
4 seconds.

CHARGING A MOBILE DEVICE

The USB socket on the backside can provide DC power of 5V / 1A for charging a mobile
device. Connect the mobile device to the USB socket with the appropriate charging
cable of the mobile device (not included with the Bluebull speaker). The USB power
is available in both Bluetooth, AUX-IN modes and Standby mode. Refer to the user
manual or the manufacturer of the mobile device to verify if it supports charging from
USB power. The USB socket is suitable for DC power-out only and cannot be used for e.g.
playback of music from a USB stick.
Warning: Never use the USB socket in rainy or moist conditions to prevent moist
from entering the Bluebull speaker and so to prevent potential short circuit.
Always keep the rubber cover well closed under these conditions.
NOTE: It is recommended to use AC mains power while charging a mobile device via
the USB socket. On battery power it is also possible to charge a mobile device from the
USB socket, however using battery power to charge a mobile device will consume much
energy from the battery and so drain the battery fast.
11

WARRANTY

The Bluebull speaker has a 2 year limited warranty.
WARNING! Warranty becomes void once the cabinet has been opened or any
modifications to the Bluebull speaker have been made!
The terms of the warranty of the Bluebull speaker do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
- Normal wear and tear.

SPECIFICATIONS

POWER requirements
AC mains input: 230V 50/60Hz AC~
Built-in Lithium Polymer Battery: 11.1V (3 cells), 4000mAh per cell
Circuit features
Loudspeakers Woofer 1 x ø5 inch and Tweeter 1 x ø1 inch
Output power on AC power 1 x 25W
AUX-IN socket ø3.5 mm
USB charging Maximum 5V, 1A
Bluetooth
Version 4.1 Supports Bluetooth profiles A2DP and AVRCP
The company reserves the right to amend the specification without notice.

ENVIRONMENTAL NOTE

This product has been manufactured with high quality parts and
materials which can be reused and recycled.
Therefore, do not throw the product away with normal household waste
at the end of its service life. Take it to a collection point for the recycling
of electrical and electronic device. This is indicated by this symbol on the
product, in the operating manual and on the packaging.
Please find out about collection points operated by your local authority.
Help protect the environment by recycling used products.
GB
G B
12