CROQUE-MONSIEUR
Croque-monsieurs can be cooked very quickly. It is best to
■ ■
prepare all of the ingredients before you start heating the unit.
Position your croque monsieur plates in the unit.
■ ■
Plug in your unit and let it pre-heat until the light goes off.
■ ■
The two external sides of the croque-monsieur, which are in
■ ■
contact with the molds, must be thoroughly buttered.
Put two croque-monsieurs into the unit.
■ ■
Close the unit, tightening it gently and progressively until it locks.
■ ■
As soon as the light goes on, you can remove your croque-
■ ■
monsieur.
You can close the unit again and cook them longer if they are
■ ■
not toasted sufficiently to your taste.
STOPPING THE UNIT
To stop it, unplug the cord.
■ ■
CHANGE OF PLATES
Unplug the unit.
■ ■
Let it cool down completely.
■ ■
Hold the plates by their handling areas.
■ ■
Remove them by pulling them towards you and replace them
■ ■
with the new ones.
To position the new plates, insert them under the fastening hooks
■ ■
and then press on the holding areas until they lock into place.
Positioning of the upper plate
Positioning of the lower plate
58