Troubleshooting Tips... Before you call for service
needed, service can be scheduled by visiting us online GEAppliances.com
GEAppliances.ca
Problem
Refrigerator does not operate
Motor operates for long periods
or cycles on and off frequently.
(Modern refrigerators with more
require more operating time. They
start and stop often to maintain even
temperatures.)
too warm
(frost within package is normal)
Automatic ice maker does not work
(if installed).
14
Possible Causes
Refrigerator in defrost cycle.
Refrigerator is unplugged.
tripped.
Normal when refrigerator is first
plugged in.
Often occurs when large amounts of
food are placed in refrigerator.
Hot weather or frequent door
openings.
Temperature controls set at the
coldest setting.
Temperature control not set cold
enough.
Warm weather or frequent door
openings.
Too frequent or too long door
openings.
Automatic energy saver system
circulates warm liquid around
compartment.
Water supply turned off or not
connected.
Piled up cubes in the storage bin
cause the ice maker to shut off.
cleaning.
What to Do
Wait about 30 minutes for defrost cycle
to end.
Set the controls to a lower temperature
setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker.
Wait 24 hours for the refrigerator to
completely cool down.
This is normal.
Check to see if package is holding door
open.
This is normal.
See Temperature Control section.
See Temperature Control section.
Set the temperature control one step
colder. See Temperature Control
section.
Check to see if package is holding door
open.
Check to see if package is holding door
open.
This is normal.
This helps prevent condensation on the
outside.
Set the power switch to ON position.
the ice maker installation instructions.
Wait 24 hours for the refrigerator to
completely cool down.
Level cubes by hand.
and turn the ice maker back on.
Wrap foods well.
See Care and Cleaning section.
Check to see if package is holding door
open.
49-60769 Rev. 5