Using Your Machine - Hoover BH52210 Mode D'emploi

Using your machine:

This vacuum cleaner has a constantly rotating brushbar when the brushbar
'ON' is selected. Never leave the vacuum cleaner in one spot for an
extended period of time as this may damage the floor surface.The brushbar
should be ON for carpets and OFF for hard floors.
3
WARNING
! !
Squeeze the trigger located
underneath the handle, the
machine will switch 'On'. The
On/Off and charging light will
illuminate green indicating the
power is on and the machine is
charged. Release the trigger to
switch the machine 'Off'.
Press the brushbar's
On/Off button to activate.
Repeat this process to
de-activate the brushbar.
The brushbar should be
switched ON for carpets
and OFF for hard floors.
WARNING
!
Risk of personal injury – the brush
roll may suddenly restart. Turn power
switch off and remove the battery before
cleaning of servicing the brush roll.
Squeeze the trigger and push the
'Continuous power latch' towards
the trigger. This will lock it into the
'On' position and will continue
to power the machine without
2
having to hold in the trigger. Push
the latch away from the trigger to
unlock and release the trigger.
When the vacuum cleaner is in use
the On/Off and charging light will
illuminate and flash red when the
battery is running low. When the
4
red light flashes the machine will
turn off in 20 seconds. The user
should recharge the machine.
!
see next page
10