Recalling Preset Stations; Remove Preset Stations; Bluetooth Mode; De-/Activate Bluetooth - Pop yourCAR 3.0 Manuel

6.2. Recalling Preset Stations

In DAB mode, press any Preset Buttons (1-5) on the front of
the device to recall your favorite DAB+ preset station. Or
press PRESET to enter the Select Preset Stations list to
show all the preset DAB+ stations. Choose a Preset Station
and se-lect it by pressing the Navigation Knob.

6.3. Remove Preset Stations

To delete all of your favourite DAB+ preset stations, press and
hold the MENU button to enter the menu mode, use the Navi-
gation Knob to search for Delete All Presets and select YES
or NO by pressing the Navigation Knob to confirm. If YES is
selected, then the complete memory will be cleared.

7. Bluetooth Mode

In order to connect a Bluetooth phone to the PyC30 both
units need to be paired. This only needs to be done during the
first connection. Once both units are paired they will
automatically connect in the future as soon as they are close.
Up to eight devices can be paired to the PyC30. If more than one
device is in Bluetooth range the PyC30 will connect to the last
connected one. If a different phone shall be connected, the
Bluetooth on the current phone needs to be disabled manually.

7.1. De-/Activate Bluetooth

In Bluetooth mode press and hold
and off.
The Bluetooth icon in the header bar will indicate the status.
• Icon not visible: Bluetooth off
• Icon flashing: Bluetooth on; not connected
• Icon constantly visible: Bluetooth on; connected
36
to toggle between Bluetooth on