Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. First Use:

1. Mount the PyC30 In-Car DAB+ Radio adapter with the
provided magnetic stand
2. Connect one end of the USB power supply cable to the Micro
USB power socket at the back of PyC30 and the other end to
the dual USB car charger. Plug the dual USB car charger into
the car cigarette-lighter socket.
3. Connect the supplied antenna to the antenna socket. To
mount the antenna correctly please refer to chapter "Installation
Guide" starting at page 86.
4. Turn on the power with the "On Button" on top of the unit
and the display will show the POP logo, then the device will
automatically scan all the local DAB/DAB+ channels and store
them in the memory of the device until another "Auto Scan" is
performed. During scanning a status bar will show the progress
of the scan.
5. Once the scan is completed, you can select any DAB/DAB+
radio channel by rotating the Navigation Knob.
28

Publicité

Table des Matières
loading

Table des Matières