Select Language; Light Button; Restore Factory Setting; Checking The Software Version Of The Device - ONYNO 8.0 Mode D'emploi

14 Select Language

1. Press and hold "Menu" button to enter the menu.
2. Use Tuning Knob to scroll up or down to select "Language Setting" and
confirm by pressing "Mode" button.
3. Use Tuning Knob to select your desired language andconfirm by
pressing "Mode" button.

15 Light button

During night trips you can switch the light buttons on and off.
1. Press and hold "Menu" to enter the menu.
2. Use the Tuning Knob to scroll to select "Light button" and confirm with
"Mode".
3. Use the Tuning Knob to select ON or OFF, and press the "Mode"
button again.

16 Restore factory setting

1. Press and hold the "Menu" button to enter the menu.
2. Use the Tuning Knob to scroll up or down to select "Factory Reset"
and confirm by pressing the "Mode" button again.
3. Use the Tuning Knob to select "YES" or "NO" for the reset and confirm
it by pressing the "Mode" button.

17 Checking the Software Version of the device

1. Press and hold the "Menu" button to enter the menu.
2. Use the Tuning Knob to scroll up or down to select "Software Version"
and confirm by pressing the "Menu" button to see the current software
version of the device.
3. Press the "Menu" button exit menu.
30