ONYNO 8.0 Mode D'emploi page 23

2. Connect one end of the USB power supply cable to the Micro USB
socket in the Model 8.0 and the other end to the dual USB car charger.
Plug the dual USB car charger to the car cigar-lighter socket.
3. Connect the supplied antenna to the antenna socket. To mount the
antenna correctly please see antenna installation instructions.
"Power Switch" and the display will show
4. Turn on the power with the
the ONYNO logo. Use the "Mode" button to select the DAB+ mode.
5. For first time use, you need to scan all the local DAB+ channels by
pressing and holding the "TX/Scan" button for 3 seconds to activate the
"Auto Scan", all available DAB+ radio channels will be scanned and
saved until another "Auto Scan" is performed. During scanning, you can
see a progress bar and the total amount of channels received.
6. Once it is scanned, you can select any DAB+ radio
channel by turning the Tuning Knob.
23