CTC VT 50 Instructions D'installation Et D'entretien page 8

English
Installation
Place the buffer tank in a dry space free from freezing conditions. If possible, it
should be placed near other heating sources. The appliance must be installed
by a properly qualified person in accordance with the instructions and local
regulations.
The buffer tank may be used in heating and cooling systems. The primary
purpose of the buffer tank is storage of superfluous energy, but it can also be
used as a hydraulic switch in heating or cooling systems.
The buffer tank was designed, manufactured and tested for the storage of
hot or cold water within the scope of the limit temperatures and pressure,
indicated in the chapter "Technical data". Using the appliance in any other way
would be inappropriate and dangerous.
Make sure to leave enough space around the buffer tank for undisturbed
regular and irregular maintenance interventions (access to sensors and
connections, cleaning, deaeration etc.).
It is recommended to install a magnetic and mechanical debris filter in order to
ensure long-lasting functioning of the system.
P...Primary circuit
S...Secondary circuit
8 CTC VT 50 - 300
When the buffer tank is
!
used in cooling systems,
it is important that all
connections are insulated
against condensation to
prevent the build-up of ice.