English - CTC VT 50 Instructions D'installation Et D'entretien

English

Congratulations on your new product
Dear customer, thank you for purchasing our
product!
Note! Prior to the installation and using the buffer tank for the first time, please
read these instructions carefully.
This buffer tank has been manufactured in compliance with the relevant standards
and tested by the relevant authorities. Its basic technical characteristics are
indicated on the label located on the protective cover.
The buffer tank must be installed and connected by a qualified professional.
Interventions within the tank may only be done by an authorised service provider.
The buffer tank was specially developed for the storage of hot or cold water for
heating within the limit temperatures and pressure, in accordance with the data
indicated in the "Technical data" chapter. Using the appliance in any other way
would be inappropriate and dangerous.
Note! Not suitable for potable water.
4 CTC VT 50 - 300