BODYTONE ZROT4 Instructions page 3

ENGLISH
When you start driving or press the button, the display will turn on automati-
cally. It shows what each item says Mode/Reset button. You can switch the
mode/each display item. If you press and hold the reset button, you
can reset the previous record of transamination. The cumulative travel
distance is not reset.
After use, if you do not touch the button for a few minutes, it will automatica-
lly shut down.
FUNCIONES
SCAN
Display items will automatically switch.
TIME
Displays the elapsed time of the exercise. Display range.
SPD (km/h)
The current speed is displayed. Display range.
DST (km)
Displays the distance traveled. Display range.
ODO (km)
The cumulative travel distance is displayed. Display range.
CAL (Cal)
Show calories burned. Display range.
If you press the button for more than 3 seconds, the data can be reset.
However, the accumulated travel distance will not be reset.
When the display of the monitor flashes, the display items will automatically
switch. If you press the button again, the item on the display will be marked.
EXERCISE MONITOR INSTRUCTIONS FOR ZROT4 · ZROTH
1. FUNCTIONAL DISPLAY DESCRIPTION
1. SPEED: 0,0-99,9 KM / ML
2. TIME: 1:00:00-1:59:59, Can be count or count backwards)
3. DISTANCE: 0.00-999.9 KM, (Can be count or count backwards)
4. CALORIES: 0-999, (Can be count or count backwards)
5. WATT: 0-1999
6. PULSE: P-30-230
7. INTERVAL: (Intermittent rest mode)
8. TARGET HR: (Rhythm control mode)
9. KM/M
10.RITMO
2. KEY-PRESS FUNCTION DESCRIPTION
1, START KEY:
A. Do temporary stop function in operation
B. Resume operations after stoppage
2 STOP KEY:
A. Do stop function in operation
B. Press 3 seconds for a total reset at any time
3 UP KEY:
A. After pressing this key during each functional display period„TIME Setting
DISTANCE Seting. CAL Seting. AGE Seting.
B. Press this key for more than 1 second during each function display to
proceed continuously(8 stages per second), and stop the entry when
dropped.