Control Panel - Klarstein BRIXEN Mode D'emploi

EN
14

CONTROL PANEL

1
Insert plug into mains socket
Select the desired functions
Switch Description
1
O/I
2 I
3
II
Rotate
4 thermostat
knob
Safety cut-off
This appliance is fitted with a safety cut-off which will operate if the heater overheats
(e.g. Due to blocked air vents). For safety reasons, the heater will NOT automatically
reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect the supply to the mains and switch on the appliance.
2 3
Function
Switches on/off electricity supply to the heater
and flame effect.
Note: This switch must be in the ON (I) position for
heater to operate with or without heat.
Switchs on/off 1000W heat output.
Switchs on/off 2000W heat output.
(with switch 2 turned on)
The flame effect can be operated with or without
heat.
Rotate thermostat knob (4) clockwise or anti-
clockwise to increase or decrease desired room
temperature setting..
4