Listening To Dab Digital Radio - Onkyo UP-DT1 Manuel D'instructions

Listening to DAB Digital Radio

Selecting DAB for the Very First Time
Turn on the Universal Port-compatible Onkyo prod-
uct which the UP-DT1 is connected. Press the [PORT]
remote mode button on your remote controller to
select the PORT input source. The UP-DT1 starts to
scan the stations in WorldWide mode automatically.
Scanning progress is shown on the display.
Once the scanning process is complete, the first sta-
tion that was detected is selected.
10
En-
Using the Auto Tuning Function Manu-
ally
If a new DAB station is introduced, or you move to a
new area, you can run the Auto Tuning function
again.
1.
Press the [SETUP] button.
2.
Use the [ ]/[ ] buttons to select "SCAN".
3.
Use the Left/Right Arrow [ ]/[ ] buttons
to select "U.K" or "WorldWide".
U.K: Band III (10A to 13F).
WorldWide: Band III (5A to 13F) and L-Band (LA
to LW).
4.
Press the [ENTER] button to scanning
DAB station.
Selecting DAB Stations
1.
Use the [ ]/[
station.
] buttons to select a