Andritz SU8 Serie Instructions De Service page 31

Series SU8
8. Protocols
8.1 Installation protocol
.............................................................
Project
1. Check the rotor of the submersible motor pump for smooth rotation.
2. Check the water filling of the motor immediately before lowering the pump.
The submersible motor must be completely filled with water.
3. Measure the insulation resistance of the motor winding during lowering:
Before lowering:
After lowering by:
- 50 m:
- 100 m:
- 150 m:
- 200m:
- 250 m:
- 300 m:
- 350 m:
- 400 m:
- 450 m:
- 500 m:
After lowering to installation depth H2:
4. Remarks:
.....................................................................................................................................................................................................
.....................................................................................................................................................................................................
.....................................................................................................................................................................................................
.....................................................................................................................................................................................................
.....................................................................................................................................................................................................
5. Submersible motor pump installed:
.............................................................
Date
Upon receipt of your installation/commissioning protocol (fax No. +49 (71 71) 60 92 88), we will check your operating data free of
charge!
32
Installation of submersible motor pumps
..........................................................
Installation site
Insulation resistance of the motor winding against mass [MΩ]
..........................................................
Phase 1
Name
.............................................................
Operated by
Phase 2 Phase 3
.............................................................
Signature


