Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
P U T T I N G O N T H E A P P L I A N C E F O R T H E P A T I E N T
Maintain the configuration set when using for the first time.
The appliance may be removed by opening the arm-support pocket
and unfastening the closure buckles.
The support is reapplied as follows:
1
Position the cushion on the side corresponding to the shoulder to be immbolilised
and place the arm in the appropriate transpiring support pocket (fig. A).
2
Close the waistband with the large click-fasten buckle (fig. B).
3
Close the arm-support pocket with the appropriate Velcro
and slip the thumb into the appropriate support.
4
For correct extra-rotation positioning, position yourself in front of a table and make
sure that the white line on the upper part of the cushion is parallel to the table.
5
Slip the opposite arm into the triangle created by the armpit and the clavicle strap,
so that the orange-marked strap is above the arm and the white-marked
one passes below the armpit (fig. D).
6
Close the guide by attaching the small click-fasten buckle (fig. E).
strips (fig. C)
®
A
B
C
D
E
Publicité
Table des Matières
