Safety Instructions Stickers (12); Functional Description - Henkel Loctite EQ HD12 Manuel D'instructions

Safety instructions stickers (12)

EN

5) FUNCTIONAL DESCRIPTION

Refer to figures {A}, {B}, {C}, {E} on page II:
• Press the trigger (21) up to its first stage (I). Atomiz-
ing air is transported through the atomizing air hose
(6) to the spraying head (31).
• Press the trigger (21) up to its second stage (II). The
piston of the drive unit (13) is activated, the plunger
discs (26+27) are extended and are pressed onto
the pistons of the cartridge.
• Dispensed material from cartridges (A) is transport-
ed at the same time into the mixer (25), adjust the
contact pressure with the adjustment wheel (22).
• The discharged atomizing air atomizes the previous-
ly mixed compound as it exits from the spraying
head (31). Adjust the discharged air volume with the
adjustment wheel (24).
• Press button (19), the plunger is retracted and the
cartridges can be removed.
WARNING
caused by discharge of high pressures
and/or bursting of the dispenser!

Always follow the instructions in this instruction
handbook exactly.
The cartridges (A), mixer (25), spray set (item
6* and 30*) and spraying head (31) are not
included in the scope of delivery.
7 of 12
Risk of serious injury
Instruction handbook
Version 1.0 · 23.12.17