Additional Instructions - Hikerboy CITY RIDER Manuel D'utilisation

(Note: Please make sure that there is no inflammable and explosive material around when charging. Charge the scooter
with the charger which meets the electric scooter standard. Please remove the battery and carry the electric scooter
in a permitted environment and compliance with state requirements.)

ADDITIONAL INSTRUCTIONS

6.
POWER-SAVING MODE
When the button on the display table is not operated and the speed adjustment handle is completely relaxed (speed
is zero) over 3-5 minutes, the system will automatically shut down and enter the power-saving mode. Press the switch
button for 3 seconds to restart.
LUBRICATION
Each month requires a small amount of lubricant oil or lubricant liquid in the handle of the fold.
NOTE: Do not use WD40 to lubricate the product parts, and do not lubricate the front and rear wheels. (In doubt, consult
the dealer.)
BRAKE
When the braking performance begins to decline, the regulator on the brake line can be adjusted to reach the desired
sensitivity. If the brake line is adjusted and the braking performance is still not good or makes sound, the brake pad
needs to be changed.
CLEAN-UP
It is recommended to regularly clean dirt on the scooter. Never wash the escooter with large amounts of water, it may
damage the electrical system. To clean the dust on the scooter use a brush, or a dry and / or damp cloth.
21 /24