Start & Ride - Hikerboy CITY RIDER Manuel D'utilisation

4. PLIAGE & DEPLIAGE
HOW TO FOLD THE E-SCOOTER
1. Lower the black metal tab (located between the main column and the deck) towards the deck.
2. Strongly squeeze the aluminum trigger (located on the left side of the folding mechanism).
3. Lower the stem, to fold the e-scooter.
HOW TO UNFOLD THE E-SCOOTER
1. Firmly squeeze the aluminum trigger (located on the left side of the folding mechanism).
2. Raise the stem to unfold the scooter.
3. Lift the black metal tab (located between the main column and the deck) towards the column, to lock the
scooter in the open position.
5. START & RIDE
START AND DISPLAY PANEL
Long press the power button to start and short press the "MODE" button to enter programs. "TIME" means travel time.
"ODO" stands for odometer.
A short press on the Start button will take you to the main menu. If you then press the "MODE" button, you can adjust
the speed (L1 low speed, L2 medium speed, L3 high speed). The selected speed is automatically memorized (when you
restart the scooter, the same speed as the one above will be set). If you turn on the scooter but do not use it within 5
minutes, it will automatically turn off.
ACCELERATOR
Pull the throttle grip to accelerate and control speed. The speed is between 1 and 20 km / h. The accelerator has a
cruise control function. If you hold the trigger pulled for more than 6 seconds, the speed will remain constant even if you
17 /24