Description Of The Display; Before Startup - Kärcher WT 5 Mode D'emploi

Illustrations on Page 3
1 Menu bar
2 Automatic irrigation
3 Manual irrigation
4 Countdown function watering
5 Interruption watering
6 Battery status control unit
7 Display day of the week
8 Display watering programme (activated/deactivated)
9 Irrigation duration
10 Display watering is active
11 Confirmation button activation/deactivation watering
12 menu / esc button
13 OK button
14 Arrow keys
15 Time / time of irrigation
16 Display watering time
17 Display current time
18 Watering period (in the morning/evening)
The device has 4 modes at disposal.
Automatic irrigation
–
With this function watering periods can be set individually and the watering is
automatically activated and deactivated.
Manual irrigation
–
With this function the watering is manually switch on or off.
Countdown function watering
–
With this function the watering is automatically switched off after a desired pe-
riod of time (max. 120 minutes).
Interruption of the watering
–
With this function the automatic watering is intermitted for 24 hours.
 The tap must be closed.
 Screw the coupling element onto the hose connection.
 If necessary, screw the reduction piece onto the water connection.
 Hold the valve unit on the casing and screw the water connection onto the water
tap.
CAUTION
Never connect the watering device to the water tap without using the supplied filter
seal.
18 English

Description of the display

Function

Before Startup