Electric Connection; Standard Accessories; Electric And Hydraulic Connection Scheme - aqua TECHNOPOOL TT Manuel D'installation Et D'entretien

2.3 Electric connection

CAUTION !!!!!
Verify that the earth system is perfectly functional and complies with the
applicable regulations. Make sure that the highly sensitive differential switch is
present (0.03 A). Verify that the rated values of the pump are compatible with those
of the mains. Never install the pump directly in parallel with inductive loads (e.g.
motors/solenoid valves) if necessary, use an isolating relay.
There are 2 protection devices inside the pump: a varistor and a fuse.

2.4 Standard accessories:

1 Technopool TT pump
3 Temperature probe
5 Wall fixing screws
7 O-ring for probe sealing (2 No)
9 Spacer for D63 assembly
11 Nut for fixing and probe protection
f Footvalve strainer
j 2 in 1 Injection probe-holder

2.5 Electric and hydraulic connection scheme

28/06/2013
ADSP7000596 TECHNOPOOL TT FRA-ING-ITA-SPA-POR Rev1.2
2 Suction and delivery tubing
4 Wall mount for pump
6 Spacer for probe sealing (2 No)
8 O-ring for sealing probe-holder J
10 Nuts and bolts for probe-holder J
12 Drill bit Ø 24 mm
14