Faults & Troubleshooting - Vasner StandLine 25R Mode D'emploi

VASNER
• If your heater should be stored for a longer time, you can use the special
customized VASNER AirCape cover hoods to protect your device from dust.
Please always cut your device from power!
Service and repair
If you notice any damage or a fault with your StandLine, it must be checked and
repaired by a specialist. This may be a qualified electrician or your dealer. Dam-
age or faults arising from unauthorised repairs, as well as modifications to the
product, misuse, negligence, and improper or inadequate maintenance void the
warranty. Dealers and the manufacturer shall not be liable.
Disposal
The VASNER StandLine must not be disposed of together with your normal
household waste. Please take the product to your local recycling centre to dis-
pose of it.
Faults & troubleshooting
Problem
The heater doesn´t work
26
Solution
Check whether the plug is plugged into the socket correctly.
Ensure the device is in balanced position.
(Your device has balance safety.)
Ensure that the running switch and the thermostat of the device
are in correct, open position.
Check whether there is a problem in the house's electrical installa-
tion.
If the problem persists, contact the authorized VASNER customer
service.
GB