Usage Of Standline 25R; Function Button - Vasner StandLine 25R Mode D'emploi

VASNER
Usage of StandLine
The VASNER StandLine has functions which can be controlled by the remot con-
trol or directly at the device. For using the remote control, please insert at first
the battery of the type „CR2025" in the remote control. Then plug the power
plug of the heater into the grounded outlet. A signal will chime.
Push the function button in front to switch: ON / OFF / heating level.
Attention:
The device has a safety system. In case of overturning, the safety system will
engage and cut off the power. In such a case the display showes „Er" which indi-
cates an Error. In order to start the device again, you need to unplug the device
and plug it in again.
LCD Display

Function button:

ON / OFF / Heating Level
22
GB