Technical Data - Matrix Xone 20V Manuel D'utilisation

during grinding work, simply connect the
convenient dust extraction system (included in
the scope of delivery) to a vacuum cleaner.
The integrated LED work lamp offers an improved
illumination of the workpiece or working surface.
The battery comes with its own battery level
indication. As a result you can check the current
charging status without having to connect it to
the device.
For yet more application possibilities you can of
course combine your multi-function tool with
further accessories, e.g. the original Trotec
accessory set for bathroom restoration.
Device depiction
1.Tool release lever
2. On/off switch
3. Setting wheel oscillation rate selection
4. LED work lamp
5. Scraping knife
6. Tool holder with clamping screw
7. Plunge-cut saw blade
8. Battery
8a. Battery level indication
8b. Release button
9. Elbow
10. Dust extraction
11. Charger
11a. Charger indicator
12. Triangle sandpaper
13. Delta sanding plate
14. Anti-vibration handle

Technical data

Voltage supply:
Idle speed:
Oscillation angle:
Battery pack
Rated voltage:
Rated input current:
charger
Input voltage:
Output voltage / current:
Vibration information according to EN 60745
Total vibration emission value:
Vibration emission value
main handle a
Vibration emission value additional handle a
Uncertainty K main handle / additional handle
Sound values according to EN 60745
Sound pressure level
Sound power level
Uncertainty K
Information on noise and vibration:
• The vibration level specified in these
instructions was determined by means of a
measuring method standardized in EN 60745
and can be used for a device comparison.
The specified vibration emission value may
also be used for a preliminary assessment of
the exposure.
• The vibration level will change depending on
the application of the power tool and may in
some cases differ from the value specified in
these instructions. The vibration load may be
underestimated if the power tool is used
20 V
regularly in such a way. For a precise
5000 - 19000 rpm
estimation of the vibration load during a
3°
certain work period, it is also important to
consider the periods during which the device
is switched off, or is running but not actually
20V d.c.
employed. This can reduce the vibration load
1500mAh
over the entire work period significantly.
220-240 V ~/ 50 Hz, 50W
21V DC / 1800 mA
:
h
Wear hearing protection.
Excessive noise can lead to hearing loss.
Caution
Vibration emissions can cause a health
hazard if the device is used for an
extended period of time or if it is not
properly handled and maintained.
UK
20,258 m/s²
:
h
20.3 m/s²
1.5 m/s²
75 dB(A)
86 dB(A)
3 dB(A)
25