Device Description - Matrix Xone 20V Manuel D'utilisation

fire! Avoid direct sunlight and moisture.
UK
There is a risk of explosion!
Warning of hot surface
The insertion tool might still be hot after
the application. Burn hazard when
touching the insertion tool.
Do not touch the insertion tool
barehanded!
Wear protective gloves!
Warning of sharp object
Parts of the saw blade are sharp. Risk of
injuries if handled without due care.
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced
during operation pose of risk to the
health of the operator and persons in the
vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing
asbestos.
Asbestos is considered carcinogenic.
Warning
Make sure not to hit power, gas or water
lines when working with a power tool.
If necessary, use a pipe detector to
check the wall you want to drill in or slit
open.
Warning
Risk of injuries caused by flying parts or
bursting tool heads.
Warning
Dangers can occur at the device when it
is used by untrained people in an
unprofessional or improper way! Observe
the personnel qualifications!
24
Warning
The device is not a toy and does not
belong in the hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around.
Children may use it as a dangerous toy.
Caution
Vibration emissions can cause a health
hazard if the device is used for an
extended period of time or if it is not
properly handled and maintained.
Caution
Keep a sufficient distance from heat
sources.
Notice
If you store or transport the device
improperly, the device may be damaged.
Note the information regarding transport
and storage of the device.

Device description

Using the wireless multi-function tool, no
additional power connection is required at your
workplace.
Up to 19,000 times per minute the insertion tool
moves to and fro by 3.2° owing to the oscillating
drive. This guarantees precise working in a very
confined space.
The integrated oscillation rate selection permits
an optimally adjusted exertion of force for each
application.
Using the quick-release system you can exchange
accessories without tools in a matter of seconds.
The anti-vibration handle ensures optimum
guidance and vibration-damped working.
It is suited particularly well for working close to
or lined up with the edge.
To avoid an excessive formation of dust and dirt