Personnel Qualifications - Matrix Xone 20V Manuel D'utilisation

Masquer les pouces Voir aussi pour Xone 20V:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
• For sawing and cutting
– Wood
– Plastic
– Plaster
– Non-ferrous metals
– Fixing elements
(e.g. screws, nails, clamps etc.)
• For processing soft wall tiles
• For sanding and scraping of small, dry areas
whilst adhering to the technical data.
We recommend using the power tool with
original
Trotec accessories.
Improper use
Do not use the device for:
• cutting up tiles
• sawing large screws or stainless steel
• processing workpieces requiring a
continuous water supply
Only use the device in weatherproof
surroundings.

Personnel qualifications

People who use this device must:
• be aware of the dangers that occur when
working with electric devices in damp areas.
• have read and understood the operating
manual, especially the Safety chapter.
Please note that our devices have not been
designed for commercial, technical or industrial
use as intended. We do not assume any
warranty if the device is used in commercial,
craft or industrial companies as well as activities
requiring equal treatment.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from
splintering, falling and flying pieces which
could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts
generated when processing workpieces.
Wear protective gloves.
They protect your hands from burns,
crushing injuries and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and
entanglement hazard posed by rotating
parts.
Residual risks
Warning of electrical voltage
Electric shock from insufficient
insulation.
Check the device for damages and
proper functioning before each use.
If you notice damages, no longer use the
device.
Do not use the device when the device
or your hands are damp or wet!
Warning of electrical voltage
Work on the electrical components must
only be carried out by an authorised
specialist company!
Warning of electrical voltage
Before any work on the device, remove
the mains plug from the mains socket
and the battery from the device!
Hold onto the mains plug while pulling
the power cable out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to
liquids penetrating the housing!
Do not immerse the device and the
accessories in water. Make sure that no
water or other liquids can enter the
housing.
Warning of explosive substances
Do not expose the battery to
temperatures above 45 °C! Do not let the
battery come into contact with water or
UK
23

Publicité

Table des Matières
loading

Table des Matières