Atlantic SOLIUS Notice D'installation Et D'utilisation page 11

1/Preparing the installation of the device
Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enfor-
ced in the country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the
connection box at least 25cm above the floor.
Keep the device away from any draughts that may interfere
with its operation (e.g.: under a centrally controlled fan, etc ...).
Do not install the device under a fixed socket.
The device is fitted with a detection system, whose sensor is located
on the front of the device.
Volume 1 No electrical device
Volume 2 Class II IPX24 electrical device
Volume 3 Class II electrical device
Comply with the minimum distances from any furniture units when
positioning the device
2/ Unlocking the device's hanging frame
3/ Fixing the hanging frame to the wall
4/ Connecting the device
Connection rules and regulations
- The device must be supplied with 230V single-phase current at 50Hz.
- The device's power supply must be directly connected to the main
supply after the circuit breaker without any intermediate switch.
- Devices equipped with a socket can be connected to a wall socket.
- The device's power cable must be connected to the main supply via a
connection box. In damp areas, such as bathrooms and kitchens, the
connection box must be installed at least 25cm above the floor.
Installation
2
11
6
3 4 5
8
7
GB