Technical Specifications - HK Audio L.U.C.A.S MAX Mode D'emploi

7 Technical Specifications

L.U.C.A.S Max Subwoofer
Inputs/outputs:
Line In:
Input:
Input impedance:
Sensitivity:
Max. input level:
Parallel out:
Speaker outputs:
Digital controller:
Sampling frequency:
Internal signal processing:
Amplifiers:
Subwoofer output:
Satellites output:
Protective circuits:
Speakers:
Woofer:
Subwoofer frequency response:
SPL 1W / 1m:
Max. SPL / 1m:
Weights and measures:
Weight:
Dimensions without casters
(WxHxD):
XLR female (pin 1= ground; 2= +, 3= -)
Electronically balanced & floating
47 k ohms
0 dBV (=1V)
+ 20 dBu
XLR male (pin 1= ground; 2=+, 3= -)
Speakon ® NL 4 (pin 1+= +, 1-= -)
24 bits/ 48 kHz
56 bits
1x 1200 W RMS / Class D power amp
2x 400 W RMS / Class D power amp
DDO™ controlled multi-band limiter
1x 15" Neodymium
40 Hz -130 Hz, ± 3 dB
32 Hz -130 Hz, - 10 dB
101 dB (half space)
130 dB @ 10% THD (half space)
39 kg / 86 lbs.
48.5 cm x 49.5 cm x 58.5 cm
19 " x 19 1/2" x 23"
L.U.C.A.S Max Satellite
Inputs:
Speaker input:
Speakers:
Woofer:
Driver:
Directivity:
Nominal impedance:
Nominal power handling:
SPL 1W / 1m:
Max. SPL / 1m:
Frequency response:
(via DDO™Controller)
Crossover frequency (passive):
Driver protection:
Pole mount:
Weights and measures:
Weight:
Dimensions (WxHxD):
General electrical data:
Protection class 1 (protectively earthed)
Max. current consumption:
Max. power consumption:
Mains voltage range
Ambient temperature range
during operation:
Speakon NL 4 (pin 1+= +, 1-= -)
1x 10" Neodymium
1x 1"
60°x 40° CD horn
8 ohms
250 W RMS fullrange
400 W RMS (130 Hz Low Cut)
104 dB (half space)
126 dB @ 10% THD (half space)
130 Hz - 19 kHz, +/- 3 dB
2.2 kHz, 12 dB / octave
Dynamic protective circuit
HK Audio DuoTilt™ 36 mm, -7.5° und –15°
11 kg / 24.3 lbs.
31.5 cm x 49 cm x 32 cm
12 3/8" x 19 1/3" x 12 5/8"
8.6 A (220 - 240 V) • 15 A (100 - 120 V)
2000 W
+/- 10%
-10° C to +35° C
11