Travel Buggy DASH Ultra Lite Power Wheelchair Mode D'emploi page 11

GETTING STARTED
A B
C
• Align the steel profile (C), to the existing mount assembly already attached to the right arm rest
of your DASH in order to create a square opening as shown in image 1
• Next place the bolt (A) through the profile to secure it to the existing mount, see image 2
• Lastly, loosely fasten the corkscrew (B) to the thread of the bolt (A) to secure the profile into
place to create the joystick mount
• Next, create the joystick mount by first locating the three joystick
mount components provided with your DASH
1 2
• Insert the joystick into the joystick mount
created above, adjust for desired length
• Fasten the corkscrew (B) to secure the
joystick into position
• Next, attach the joystick connection
cable by aligning the arrows on the
cable and pressing together
• Secure the cable connection by rotating
the coupling rings on each end of the
cable
3
11